Sign In:
Your IP:

How to Work with Images/Pictures Resolution & Sizing

    Resolution & Sizing

    Resolution is what determines if your pictures look "chunky" when you print them. All computer pictures are made up of small dots. Resolution is how many dots in an inch, often referred to as DPI or "Dots Per Inch". Your computer monitor generally displays less than 100 DPI while a printer usually prints at 300 to over 1000 DPI. What looks good on your screen will not necessarily look good printed. Luckily, apparel is not exactly photo-paper, and the naturally un-smooth nature of cloth hides some resolution issues. But not all! When you create a picture you will want to follow the guidelines presented in the Image Resolution Guidelines (see chart below), specific to each product. For the most part, pictures should be between 100 and 300 DPI to print well on the products you sell. Below is an example of how a graphic gets more "chunky" as you size it larger, resulting in a smaller DPI.

    When creating images, start your image at 200-300 DPI. You can always decrease your image and maintain a clean, crisp image. However, you cannot increase the resolution and image size of your image without compromising the image quality. Making your image larger will cause the image to look "dirty". See the example below of how a "dirty" image looks when increasing the DPI.


    What are Resolution and DPI?

    Resolution and DPI are often used interchangeably, but they are quite different. Knowing the difference between them will enable you to get the most from's services.

    Any digital image is composed of pixels. The pixels are the small colored square dots that can sometimes be seen when images are enlarged too much, or if you look at your screen close enough. Resolution is the number of pixels in the horizontal direction by the number of pixels in the vertical direction. For example, a picture with 1200 pixels at the horizontal direction and 2100 pixels at the vertical direction would have a resolution of 1200 x 2100 pixels (pronounced 1200 by 2100 pixels).

    As you've probably noticed, nowhere in the above definition it is said what size the pixels are. This is where the DPI comes in. DPI is simply Dots Per Inch. A picture with 100 x 100 resolution would be 1 x 1 inch when printed at 100 DPI, and 100 x 100 inch when printed at 1 DPI!

    There's a tradeoff. The bigger the resolution, the bigger the image is. It will take more disk space, occupy more memory when loaded, and will take longer to be transferred through the Web. On the other hand, the bigger the resolution, the better the image looks when printed. We feel it is better to wait a bit more for your photo to upload than to have a bad print at the end.


    Maximum file sizes for each format
    (before receiving timeout errors while uploading)

    If you are receiving a timeout error, check to see how large your file is. Depending on the speed of your internet connection, files over 7 MB can timeout.

    JPG - 7 MB

    PNG - 4 MB


    Extra Tips:

    1. - Print the picture yourself on your own printer at the same size you want it to appear on your products. If it looks "chunky" or "dirty" on your printer, it will look "chunky" or "dirty" on your products too.

    2. - If you save using JPG format, try using the lowest compression setting possible. Where this setting is located varies with different image software, but they should all have a 1-100 compression factor that you can set. Lower compression means less distortion. If you have the choice of having no compression at all that would be ideal.

    3. - On colored fabrics be aware that any white in your image will show as the color of the fabric. White ink is not possible in our current dye sublimation process. Also very light colors may be affected by the color of the shirt.

    4. - When creating graphics, try to reduce as much white space around the image as you can. Creating extra white space around the image will prevent the image to print its maximum size. Please see example:

    Published on: 2006-08-16 Author: